Acer G901 Manual Do Utilizador
Appendix A: System rack installation
152
3
Remove the screw (Figure 61, B) that holds the rear foot to the
chassis, slide the foot upward, then remove the foot.
chassis, slide the foot upward, then remove the foot.
Note: If the rack system will ever be converted back to a tower
configuration, be sure to keep all unused tower parts—the tower
bezel, keys, bottom and left panels, feet, and two screws—for
future use.
configuration, be sure to keep all unused tower parts—the tower
bezel, keys, bottom and left panels, feet, and two screws—for
future use.
Installing the rack bezel
1
Remove the rack bezel keys that are taped to the inside of the rack
bezel and secure them for future use. At a minimum, attach them
to the plastic key clip located on the rear panel of the system so
they do not get lost.
bezel and secure them for future use. At a minimum, attach them
to the plastic key clip located on the rear panel of the system so
they do not get lost.
2
Open the door on the rack bezel from the rack conversion kit.
3
Align the eight tabs on the rack bezel with the eight slots on the
front of the chassis.
front of the chassis.
Figure 61 - Removing the feet
BB!H:11!vh!.!FO/cppl!!Qbhf!263!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN