Fujitsu RX900 S1 Manual Do Utilizador
RX900 S1
Maintenance Manual
293
Cables
6. Remove all CPUMEMRs, see
I
Before removing the CPUMEMRs, take a note on the installation
slot number for each CPUMEMR. Make sure that you reinstall the
CPUMEMR in the slot it was located before the replacement.
slot number for each CPUMEMR. Make sure that you reinstall the
CPUMEMR in the slot it was located before the replacement.
7. Remove all expansion cards and dummy modules in PCIe slots #8 to
#17, see
I
Before removing the expansion cards, take a note on the
installation slot number for each card. Make sure that you reinstall
the card in the slot it was located before the replacement.
installation slot number for each card. Make sure that you reinstall
the card in the slot it was located before the replacement.
8. Remove the PCI Riser, see
15.1.3 Removing the fan cage
Figure 184: Removing the fan cage
Ê
Loosen the captive screws (1).
Ê
Lift the fan cage out of the chassis (2).
/
/
0