Fujitsu TX200 S6 Manual Do Utilizador
TX200 S6
Operating Manual
77
Starting up and operation
5.3
Switching the server on and off
V
CAUTION!
It nothing appears on the screen but flickering stripes after switching on
the server, switch the server off immediately (see chapter
the server, switch the server off immediately (see chapter
).
The On/Off button does not disconnect the server from the mains
voltage. To completely disconnect it from the mains voltage, remove the
power plug(s) from the socket(s).
voltage. To completely disconnect it from the mains voltage, remove the
power plug(s) from the socket(s).
Switching the server on
The power-on indicator (see figure
) lights up orange (standby
mode).
–
Starting up for the first time:
Ê
Press the On/Off button (see figure
).
Ê
Insert ServerView Suite DVD 1 in the DVD drive.
Ê
Follow the on-screen instructions (see also section
or section
).
–
System already installed:
Ê
Press the On/Off button.
The server is switched on, performs a system test and boots the
operating system.
operating system.
I
Depending on the configurations, the boot process may be prolonged
and the screen may remain dark for a while.
and the screen may remain dark for a while.
Switching the server off
Power-on indicator lights up green.
Ê
Shut down the operating system properly.
The server is switched off automatically and goes into standby mode. The
power-on indicator lights up orange.
power-on indicator lights up orange.