Hitachi 8880R Manual Do Utilizador
Ch 2: System Environment Setting
32
Hitachi VisionBase 8880R Server
WinNT 4.0 Install Mode
If you install WindowsNT with a memory capacity of 4GB or more, choose “Disabled”. This will temporarily
decrease the memory capacity to 3.5GB or less. In ordinary circumstances, use the default setting “Disabled”.
decrease the memory capacity to 3.5GB or less. In ordinary circumstances, use the default setting “Disabled”.
•
Disabled (default)
•
Enabled
Caching Above 4GB
Used to specify whether or not to allocate an area of 4GB or more to the secondary cache area when the memory
capacity is 4GB or more. Be sure to leave the default “Disabled” as is.
capacity is 4GB or more. Be sure to leave the default “Disabled” as is.
•
Disabled:
Does not allocate (default)
•
Enabled:
Allocates.
Large Disk Access Mode (Unsupported)
Used to set an access method for the IDE hard disk. This setting is unsupported. Use the default “DOS”.
•
DOS:
Use in MS-DOS (default)
•
Other:
Use in an OS other than MS-DOS
Disk Write Cache (Unsupported)
Used to set write cache for the IDE hard disk. This setting is unsupported. Use the default “Enabled”.
•
Disabled
•
Enabled (default)
Speaker Volume
Used to set the volume of the buzzer in the system equipment. In ordinary circumstances, use the default setting
“High”.
“High”.
•
High:
High volume (default)
•
Medium: Medium
volume
•
Low: Low
volume
USB Controller
Used to set the USB controller. In ordinary circumstances, use the default setting “Enabled”.
•
Disabled
•
Enabled (default)
NOTE: Do not change the setting in “USB Controller” with the ICU.