Lucent Technologies 555-233-115 Manual Do Utilizador
Adding or Removing Cabinet Hardware
6-1
Single-Mode Fiber Attenuators
6
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
6
Adding or Removing Cabinet
Hardware
Hardware
This chapter contains information to add or remove cabinet hardware. To install
adjunct or peripheral equipment, refer to
adjunct or peripheral equipment, refer to
DEFINITY Enterprise Communications
Server Release 8 Installation for Adjuncts and Peripherals.
To add fiber optic cables to an existing system, refer to
DEFINITY Enterprise
Communications Server Release 8 Installation and Test for Multicarrier Cabinets.
Single-Mode Fiber Attenuators
Attenuators may be required when using single-mode fiber. See the table below.
A different value attenuator may be required even though the fiber span is
between the same 2 cabinets (local and remote cabinet). Refer to
between the same 2 cabinets (local and remote cabinet). Refer to
DEFINITY
Enterprise Communications Server Release 8 Installation and Test for Multicarrier
Cabinets for detailed fiber attenuator information.
Cabinets for detailed fiber attenuator information.
106060718
5 dB attenuator
2 for each fiber connection
106060734
10 dB attenuator
2 for each fiber connection
106061021
15 dB attenuator
2 for each fiber connection