Multi-Tech Systems MVP210/410/810 Manual Do Utilizador
Chapter 4: Configuring your VOIP
Multi-Tech
Systems,
Inc.
69
The fields of the RADIUS screen are described in the table below.
RADIUS Screen Field Definitions
Field Name
Values Description
Enable Accounting
Y/N
When checked, the MultiVOIP will access the accounting functionality of the
RADIUS server.
RADIUS server.
Server Address
n.n.n.n
IP address of the RADIUS server that handles accounting (billing) for the
current MultiVOIP unit.
current MultiVOIP unit.
Accounting Port
1 - 65535
TDM time slot at which RADIUS accounting information will be transmitted
and received.
and received.
Retransmission
Interval
Interval
If the MultiVOIP sends out a packet to the RADIUS server and doesn't
receive a response in the retransmit interval, it will retransmit that packet
again and wait the retransmit interval again for a response. How many times
it does this is determined by the setting in the Number of Retransmissions
field.
receive a response in the retransmit interval, it will retransmit that packet
again and wait the retransmit interval again for a response. How many times
it does this is determined by the setting in the Number of Retransmissions
field.
Number of
Retransmissions
Retransmissions
0 - 255
Shared Secret
alpha-numeric
Client encryption key for the current VOIP unit.
Select Attributes
(button)
(button)
--
Gives access to RADIUS Attributes screen. On Attributes screen, one can
specify the parameters to be tallied by the RADIUS server for accounting
(usually billing) purposes.
specify the parameters to be tallied by the RADIUS server for accounting
(usually billing) purposes.
The RADIUS dialog box has a secondary dialog box, RADIUS Attributes, that allows you to customize
accounting information sent to the RADIUS server by the MultiVOIP. The MultiVOIP software logs data about
many aspects of the call traffic going through the MultiVOIP. The RADIUS Attributes screen lets you pick which
aspects will be included in the accounting reports sent to the RADIUS server.
“RADIUS Attributes” Definitions
Field
Description
Field
Description
Select All
Log report to include all fields
shown.
shown.
Start Date, Time
Date and time the phone call began.
Channel
Number
Number
Data channel carrying call.
Call Mode
Voice or fax.
Duration
Length of call.
Packets Received
Total packets received in call.
Packets Sent
Total packets sent in call.
Bytes Received
Total bytes received in call.
Bytes Sent
Total bytes sent in call.
Coder
Voice Coder /Compression Rate used for
call will be listed in log.
call will be listed in log.
Packets Lost
Packets lost in call.
Prefix Matched
When selected, the phonebook prefix
matched in processing the call will be listed
in log.
matched in processing the call will be listed
in log.
Outbound
Digits Sent
Digits Sent
DTMF digits received by this
gateway from remote gateway
(if that DTMF set to "Out of
Band").
gateway from remote gateway
(if that DTMF set to "Out of
Band").
Call Status
Successful or unsuccessful.
Server Details The IP address of the traffic control server being used will be displayed here if the call is handled
through that server. The Options field refers to non-mandatory server features that might be
activated. For example, with H.323, various H.323 Version 4 options might be listed.
activated. For example, with H.323, various H.323 Version 4 options might be listed.
From Details
To Details
Gateway
Number
Number
Originating gateway
Gateway
Name
Name
Completing or answering gateway
IP Address
IP address where call originated.
IP Address IP address where call was completed/answered.
Descript
Identifier of where call originated. Descript Identifier
of
where call was completed/answered.
Options
When selected, log will not use
Silence Compression and Forward
Error Correction by call originator.
Silence Compression and Forward
Error Correction by call originator.
Options
When selected, log will not use Silence
Compression and Forward Error Correction by
party answering call.
Compression and Forward Error Correction by
party answering call.