Netgear RNDP6310-100NAS Manual Do Utilizador

Status Information

You can obtain information about the status of your unit by reviewing the indicators listed in 
the following table. 

Power button and LED

Press this button to boot the ReadyNAS. The LED has these states:

•  Blinking. Booting

•  Blue. Powered on

•  Off. Powered off

Disk icons (1, 2, 3, 4, 5, 6)

Disk icons are located on the status display screen. The disk icons have these 
states:

•  Empty box. No disk is installed in that bay.

• Numbered box. A disk is installed in the bay that corresponds to that icon and 

it is operating properly.

• X in box. The disk in the bay that corresponds to that icon was removed or 

failed. See the status display screen for details.

Rear panel Ethernet port 
LEDs

Two LED status indicators are built into these ports. One LED indicates port 
activity. The other LED indicates connection speed as follows:

•  Green. The port is operating at 1,000 Mbps.

•  Amber. The port is operating at 100 Mbps.

•  Off.  The port is operating at 10 Mbps.

Status display screen

Displays messages about the status of your unit. Note that the status display 
screen goes to sleep to prevent burn-in; to wake it, press the Power button. If the 
unit reports an abnormal operation or error, the status display screen stays on.