NCR S26 Manual Do Utilizador

Installing and Removing Expansion Boards

3-16

Adding and Replacing Components

A PCI board has a single row of tightly spaced contacts along its connectors.
There is usually a single notch in the connector.

To install an expansion board, follow these steps:

1. Study the documentation that came with your expansion board, and

configure any jumpers or switches on the board as directed.

2. Remove a bracket from any empty expansion slot. Save the screw to

secure the new board. Keep the bracket for future use. See the figure
below.

3. Gently insert the board into an expansion slot. Make sure the board is

securely seated. See Figure 3-7.

4. Secure the board with the bracket screw.