Patton electronic 29XX Manual Do Utilizador
WAN Circuit CONFIGURATION window
284
Access Server Administrators’ Reference Guide
23 • Sync PPP
•
pap(3)—password authentication protocol will be used
•
chap(4)—challenge handshake authentication protocol will be used
•
chapORpap(5)—chap will be negotiated first, if that fails, pap will be attempted
Authentication Side (pppAuthenticationSide)
Side of the link which will be authenticating
Side of the link which will be authenticating
•
local(1)—local server will be authenticating. Remote needs to log into local server.
•
remote(2)—remote server will be authentication. Local needs to log into remote server.
Authentication Username (pppAuthenticationUsername)
This is the username that will be sent to the remote side if the remote machine is authenticating. If the local
server is authenticating, the username that the remote sends will be compared to this username. Maximum size
is 40 characters.
This is the username that will be sent to the remote side if the remote machine is authenticating. If the local
server is authenticating, the username that the remote sends will be compared to this username. Maximum size
is 40 characters.
Authentication Password (pppAuthenticationPassword)
This is the password that will be sent to the remote side if the remote machine is authenticating. If the local
server is authenticating, the password that the remote sends will be compared to this username. Maximum size
is 40 characters.
This is the password that will be sent to the remote side if the remote machine is authenticating. If the local
server is authenticating, the password that the remote sends will be compared to this username. Maximum size
is 40 characters.
Security Level (pppAccessLevel)
The security level given to this call.
The security level given to this call.
•
passthru(1)—allows no access in the configuration screens
•
monitor(2)—allows read-only access to the configuration screens
•
change(3)—allows full read and write access to the configuration screens
MRU (pppInitialMRU)
Initial setting for Maximum Receive Unit (MRU), used for the PPP negotiation
Initial setting for Maximum Receive Unit (MRU), used for the PPP negotiation
IP Address (pppServiceIpAddress)
This object defines the IP address which will be used for the PPP link
This object defines the IP address which will be used for the PPP link
IP Mask (pppServiceIpMask)
This object defines the IP mask, which will be used for the PPP link
This object defines the IP mask, which will be used for the PPP link
IP Compression (pppIpCompression)
This object defines the IP compression for the link
This object defines the IP compression for the link
IP Force Next Hop (pppForceNextHop)
This object defines the IP address of the interface, which should be the next hop for the packets—fast routing
This object defines the IP address of the interface, which should be the next hop for the packets—fast routing