Adtran MP-118 Manual Do Utilizador
Quick Installation Guide
3. Configuring the MediaPack
Version 5.0
29
September 2007
3.3.2.6 Defining
Automatic
Dialing
When using the One-to-One option, each PBX line that is connected to an FXO port serves one
OCS client. You must define automatic dialing for each FXO port connected to the OCS client.
OCS client. You must define automatic dialing for each FXO port connected to the OCS client.
¾
To define Automatic Dialing, take these 4 steps:
1.
Open the ‘Automatic Dialing’ screen (Protocol Management menu > Endpoint Settings >
Automatic Dialing
Automatic Dialing
).
Figure 3-16: Automatic Dialing Screen
2.
In the 'Destination Phone Number' field, enter the OCS client's phone number that this FXO
port serves.
port serves.
3.
From the ‘Auto Dial Status’ drop-down list, select ‘Enable’.
4.
Click the Submit button to save your changes.