Citrix Systems 9.3 Manual Do Utilizador
S row abbreviation/symbol
Indicates
A rate of 100 megabits per second, half
duplex mode, and flow control OFF.
duplex mode, and flow control OFF.
A rate of 1 gigabit per second, half
duplex mode, and flow control OFF.
duplex mode, and flow control OFF.
The following table defines the various abbreviations and symbols that appear in the
R row of the port information screen.
R row of the port information screen.
Table 1-2.
Port Abbreviations and Symbols for R Row
R row abbreviation/symbol
Indicates
The port is disabled.
Receive speed is about 10% of line
speed.
speed.
Receive speed is about 50% of line
speed.
speed.
Receive speed is about 75% of line
speed.
speed.
Receive speed is about 100% of line
speed.
speed.
Ports
Ports are used to connect the appliance to external devices. NetScaler appliances
support RS232 serial ports, 10/100/1000Base-T copper Ethernet ports, 1-gigabit copper
and fiber 1G SFP ports, and 10-gigabit fiber SFP+ and XFP ports. All NetScaler
appliances have a combination of some or all of these ports. For details on the type
and number of ports available on your appliance, see the section describing that
platform.
support RS232 serial ports, 10/100/1000Base-T copper Ethernet ports, 1-gigabit copper
and fiber 1G SFP ports, and 10-gigabit fiber SFP+ and XFP ports. All NetScaler
appliances have a combination of some or all of these ports. For details on the type
and number of ports available on your appliance, see the section describing that
platform.
Chapter 1
Introduction to the Hardware Platforms
16