Fujitsu fi-4640S Manual Do Utilizador

 7-11

<Screen 52>

1 Press “Next”  

 or “Previous” 

 and let the

scanner display Screen 52.

2 At Screen 52, press  

 or 

 to select the

time duration. A minimum of 5 min to the
maximum of 60 minutes can be selected.
Then press 

 to activate the setting.

At screen 52, “No” does not mean that you can turn off the “Low Power Mode” (Power Save Mode).  You
cannot disable the Power Save Mode.

The default time recommended by the E

NERGY

S

TAR

®

 program is 15 minutes.  The default for the fi-4640S

scanner is 15 minutes, as recommended.

3 Press 

 to return.

<Screen 53>

1 Press “Next”  

 or “Previous” 

 and let the

scanner display Screen 53.

The screen 53 will appear oniy when the scanner has proper interface boards or option boards in the third
party slot.

2 At Screen 53, press 

 or 

 to select the

interface type. Press 

 if you want to

change the setting.

1. Normally, this setting does not have to be changed.

2. When an appropriate board is installed in the third party slot of the scanner, the scanner automatically

turns off the SCSI interface, activating the board in the third party slot.  Screen 53 can be used to
forcibly change the selected interface. The selected interface is then forcibly changed.

3. The SCSI interface and the board installed in the third party slot cannot be used at the same time.

4. The default is Auto.

3 Press 

 to return.