Visioneer 6200 Manual Do Utilizador

I

NSTALLING

 

TO

 

A

 USB P

ORT

The Visioneer scanner connects to any available USB port. Check your 
computer’s user’s guide for its USB port locations. 

To connect the Visioneer scanner to a USB port:
1. Plug one end of the USB cable into an available USB port.

Some newer computers also have keyboards with USB ports. 
You can plug the scanner into the keyboard instead of the USB port 
on the computer.

2. If you are connecting the 6400 scanner, slide the latch on the back 

of the scanner to uncover its USB port.

If you are connecting a 6200 scanner, the USB port is shown in the 
following figure. 

Note:  You do not have to shut off the power to your computer when 
connecting the scanner to a USB port. 

USB port

USB port