Hand Held Products 3800ESD Folheto

The 3800ESD is a high performance scanner

designed for the stringent requirements of clean room

assembly of sensitive electronic components.  The

3800ESD is constructed of conductive materials

engineered to eliminate the build up of dangerous

static charge on the scanner, and to quickly drain the

charge from any other object with which it comes in

contact.  The 3800ESD is assembled for use in a

Class 100 clean room environment and is triple

bagged for proper introduction into the end use

environment.

Internal components of the 3800ESD scanner are

isolated from the conductive path formed by the case,

output connector shield, and special shielded cable

with drain wire.  The scanner is rated for discharges

up to 15 kV without damage.

Two models are available:  the 3800VHD/ESD which

reads very high density bar codes, and the 3800LR/

ESD for more typical applications.

All materials used in the 3800ESD are tested using

the methods described in ASTM D257, Standard Test

Methods for Conductance of Insulating Materials.  The

surface resistivity is rated at less than 10E5 ohms/

square.  Triboelectric residual charge is measured

with a non contact Electrostatic Field Meter and is

less than 5 volts on any surface.

To learn how the 3800ESD can work for you, contact
us at any of the locations listed on the back or visit us
at www.handheld.com.