Hand Held Products 7400 Manual Do Utilizador
12 - 14
When using right-angle style RS-232 connector cable, the DIN rails may be mounted directly to the wall. When using standard
RS-232 connector cables, it is recommended that the rails be mounted to the wall using a 25mm (1 in.) spacer to allow for
appropriate strain relief of the cables.
RS-232 connector cables, it is recommended that the rails be mounted to the wall using a 25mm (1 in.) spacer to allow for
appropriate strain relief of the cables.
In either case, after wall mounting,
it is recommended that the cables be secured to the DIN rail through use of a wire tie
to
prevent damage to the IntelliBase/USB HomeBase unit in case accidental or excessive force is applied to the cables.