Hand Held Products 7400 Manual Do Utilizador
13 - 4
Troubleshooting
If you encounter problems with your Dolphin QuadCharger, refer to chart below for possible solutions. If problems persist, please
contact HHP Technical Support.
contact HHP Technical Support.
Problem
Issue
The “CHARGING” LED does not come on
when I insert a battery pack into the Dolphin
QuadCharger
when I insert a battery pack into the Dolphin
QuadCharger
Check the power connections on the Dolphin QuadCharger. Also check to
ensure the POWER switch is ON and the battery pack is properly seated.
ensure the POWER switch is ON and the battery pack is properly seated.
The red status LED comes on during
charging.
charging.
Try to charge the battery in one of the other charging pockets. If the red
Status LED comes on again, then the problem is associated with the
battery pack. If the red status stays with the charging pocket, the problem
is associated with the charging circuity.
Status LED comes on again, then the problem is associated with the
battery pack. If the red status stays with the charging pocket, the problem
is associated with the charging circuity.
The red status LED remains on without a
battery in the charging pocket.
battery in the charging pocket.
An error occurred during the self-diagnostic test for that particular charging
pocket. Call HHP Product Service and request an RMA. See Chapter 9 for
additional warranty and return information.
pocket. Call HHP Product Service and request an RMA. See Chapter 9 for
additional warranty and return information.