Hand Held Products 7400 Manual Do Utilizador

The Detectoid Communication Utility makes it easier to set-up communications between your PC and Dolphin 7300, 7400 or 
7450 terminal. The utility has two components: DetectoidPC for setting up ActiveSync on the PC and DetectoidCE for setting 
communication parameters on the Dolphin terminal.

The DetectoidPC.exe file is located in the \Utilities\PC directory on the user’s CD that is shipped with the Dolphin terminal. Users 
may run the executable right from the CD-ROM, or they can copy it to their machine. 

System requirements for installing DetectoidPC on your PC are:

Operating system:   Windows 98, 2000, or XP

Free disk space:      Less than one megabyte

DetectoidPC is included with Dolphin 7400 and 7450 terminals using kernel 2.08 with Service Pack 2 or kernel 2.11 or later; and 
Dolphin 7300 terminals with kernel 3.02 or later.

Use DetectoidPC to configure the ActiveSync settings on your PC for communication with a Dolphin terminal. Detectoid PC sets 
the baud rate and configures the COM port for ActiveSync. Once the settings are configured, you can save them and your PC is 
always ready to connect with the Dolphin terminal. 

Before starting, ensure that your Dolphin is connected via serial cable or docked in a working HomeBase or IntelliBase. If 
ActiveSync is detected to be running on the PC when DetectoidPC is started, the following message will appear:

DetectoidPC Screen as seen on Host PC

DetectoidCE Screen as seen on Dolphin 7400/7450