Konica Minolta TWIN Driver Manual Do Utilizador
Installing the TWAIN driver
2
TWAIN Driver
2-2
Connecting to the network
In order to perform TWAIN scanning on a network, the optional network in-
terface card NC-503 or image controller IC-206 must be installed. For details
on connecting this machine to the network, refer to “Installing the TWAIN
driver by using the installer” on page 2-12. For details on the network inter-
face card NC-503 and image controller IC-206, refer to the corresponding
User’s Guide.
terface card NC-503 or image controller IC-206 must be installed. For details
on connecting this machine to the network, refer to “Installing the TWAIN
driver by using the installer” on page 2-12. For details on the network inter-
face card NC-503 and image controller IC-206, refer to the corresponding
User’s Guide.
Procedures for making connections and installing the driver
The TWAIN driver can be installed by using Plug and Play or by using the in-
staller.
staller.
The installation procedure differs depending on the method used to make
the connection. Use the installation method that corresponds with the con-
nection method.
the connection. Use the installation method that corresponds with the con-
nection method.
2
Reminder
If the machine is to be connected to a USB port, install the driver by using
Plug and Play. If the machine is to be connected to a network, install the
driver by using the installer.
Plug and Play. If the machine is to be connected to a network, install the
driver by using the installer.
Connection
method
method
Supported operating sys-
tems
tems
TWAIN driver installation method
USB port con-
nection
nection
Windows XP, Windows
Server 2003, Windows Vista,
Windows 2000 and Win-
dows Me
Server 2003, Windows Vista,
Windows 2000 and Win-
dows Me
Install using Plug and Play.
For details, refer to “Installing the TWAIN
driver by using Plug and Play” on
page 2-5.
For details, refer to “Installing the TWAIN
driver by using Plug and Play” on
page 2-5.