Toshiba 202L Manual Do Utilizador

• TX TYPE — This sets the type of the fax transmission mode.  Press the [MEMORY TX] button to select the 

memory transmission mode or the [DIRECT TX] button to select the direct transmission mode.

• ECM — Select whether enabling or disabling the ECM (Error Correction Mode) to automatically resend any 

portion of the document affected by phone line noise or distortion.  Press the [ON] button to enable the ECM, 
or the [OFF] button to disable the ECM.

• QUALITY TX — Select whether a document is sent in the Quality TX mode. This feature allows to send a doc-

ument at a slower speed than a normal so that the transmission will be less affected by line condition.  Press 
the [ON] button to enable the Quality TX, or [OFF] button to disable the Quality TX.

• LINE SELECT — Select the line to be used for the fax transmission.  Press the [LINE1] button to use the Line 

1, or [LINE2] button to use Line 2.  The [LINE2] button can be selected only when the optional 2nd line board is 
installed.

• [SUB] — Enter the mailbox number if you want to send originals to the mailbox in the remote fax.
• [SID] — Enter the password to input a document into the mailbox in the remote facsimile.
• [SEP] — Enter the mailbox number if you want to retrieve a document from the mailbox in the remote fax.
• [PWD] — Enter the password to retrieve a document from the mailbox in the remote facsimile.

When you press the [SUB], [SID], [SEP], and [PWD] buttons, the input screen is displayed.  Enter the value using 
the keyboard and digital keys, and press the [ENTER] button to set the entry.