Toshiba MR-3018 Manual Do Utilizador
© 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved
MR-3018/3020/3021/3022
ADJUSTMENT
5 - 1
5
5. ADJUSTMENT
5.1
Adjustment of Position
Perform this adjustment when the RADF is not installed in the correct position.
Note:
Note:
Check if the image adjustment for the equipment is performed properly before this adjustment of
the RADF. (See the Service Manual or Service Handbook of the applicable equipment.)
the RADF. (See the Service Manual or Service Handbook of the applicable equipment.)
[A] Checking
(1) Open the RADF and install 2 positioning pins
(the positioning pins are installed to the back
side of the hinge which is on the left side of
the RADF).
side of the hinge which is on the left side of
the RADF).
Fig. 5-1
(2) Remove the platen sheet.
Fig. 5-2
11/12