Canon Model 6401 B Manual Do Utilizador
Field Test Unit Software
1. INTRODUCTION
The purpose of this documentation is to describe the function and opera-
tion of the Model 6401B Field Test Unit in conjunction with UNIDATA’s
Portable Data Logger. This document is aimed at the inexperienced user
who is unfamiliar with the Field Test Unit (FTU).
tion of the Model 6401B Field Test Unit in conjunction with UNIDATA’s
Portable Data Logger. This document is aimed at the inexperienced user
who is unfamiliar with the Field Test Unit (FTU).
The Portable Data Logger and Field Test Unit act as a team for the collec-
tion and transfer of data from remote, unmanned locations. The data logger
is a battery operated data gathering unit, and the Field Test Unit is a port-
able dedicated computer with specialized software for communication with
the data logger.
tion and transfer of data from remote, unmanned locations. The data logger
is a battery operated data gathering unit, and the Field Test Unit is a port-
able dedicated computer with specialized software for communication with
the data logger.
1.1 PORTABLE DATA LOGGER
The Portable Data Logger (PDL) is a microprocessor based device
designed to have a battery lifetime of over 2 years. This allows the logger to
remain in the fields for long periods of time for the recording of data. The
data is recorded in CMOS RAM memory which is available in 8K to 64K
capacities. The logger provides analogue and digital inputs for data sam-
pling, and internal logger programs and crystal clock for the recording of
data in the logger’s memory.
designed to have a battery lifetime of over 2 years. This allows the logger to
remain in the fields for long periods of time for the recording of data. The
data is recorded in CMOS RAM memory which is available in 8K to 64K
capacities. The logger provides analogue and digital inputs for data sam-
pling, and internal logger programs and crystal clock for the recording of
data in the logger’s memory.
1.1.1 Memory structure
The memory of the logger is divided into 256 byte Blocks (e.g. a 24K logger
will have 96 blocks, and a 64k logger has 256 blocks). Hence, any particular
will have 96 blocks, and a 64k logger has 256 blocks). Hence, any particular
location in the logger’s memory can be referred to in two ways: either by its
absolute location in memory, or by its block and location within that block
(e.g. absolute location 0 is also block 0 location 0; absolute location 1023 is
absolute location in memory, or by its block and location within that block
(e.g. absolute location 0 is also block 0 location 0; absolute location 1023 is
block 3 location 255).
Block 0 is used to store the clock, pointers, counters, ac-
cumulators, channels and other information neces-
sary to the running of the logger.
sary to the running of the logger.
Block 1 is used to store Buffer Pointer information (BLK 1, LOC
0) and the Data Logger program (BLK 1, LOC 128)
Blocks 2 & 3 are reserved for the Data Logger Program.
Section 1. INTRODUCTION
1