Canon DS126251 Manual Do Utilizador
103
You can select one of four methods to measure the subject brightness. In
fully-automatic modes (1/C), evaluative metering is set automatically.
fully-automatic modes (1/C), evaluative metering is set automatically.
1
Press the <n> button.
(9)
2
Select the metering mode.
While looking at the LCD panel, turn
the <6> dial.
the <6> dial.
q
Evaluative metering
This is a general-purpose metering mode suited for
portraits and even backlit subjects. The camera
sets the exposure automatically to suit the scene.
portraits and even backlit subjects. The camera
sets the exposure automatically to suit the scene.
w
Partial metering
Effective when the background is much brighter than
the subject due to backlighting, etc. Partial metering
covers about 9.4% of the viewfinder area at the center.
the subject due to backlighting, etc. Partial metering
covers about 9.4% of the viewfinder area at the center.
r
Spot metering
This is for metering a specific spot of the subject or scene.
The metering is weighted at the center covering about
2.3% of the viewfinder area. When spot metering is set,
the spot metering circle will be displayed in the viewfinder.
The metering is weighted at the center covering about
2.3% of the viewfinder area. When spot metering is set,
the spot metering circle will be displayed in the viewfinder.
e
Center-weighted average metering
The metering is weighted at the center and then
averaged for the entire scene.
averaged for the entire scene.
q
Selecting the Metering ModeN
COP
Y