Canon DS126251 Manual Do Utilizador

Página de 276
108
F: Bulb Exposures
If you take a picture without looking at the viewfinder, light entering the 
eyepiece can throw off the exposure. To prevent this, use the eyepiece 
cover (p.23) attached to the camera strap. During Live View shooting 
and movie shooting, attaching the eyepiece cover is unnecessary.
1
Remove the eyecup.
 
While grasping both sides of the 
eyecup, slide it upward to remove.
2
Attach the eyepiece cover.
 
Slide the eyepiece cover down into 
the eyepiece groove to attach it.
You can connect the Remote Switch RS-80N3 or Timer Remote 
Controller TC-80N3 (both sold separately) or any EOS accessory 
equipped with an N3-type terminal to the camera and shoot with it.
To operate the accessory, refer to its instruction manual.
1
Open the terminal cover.
2
Connect the plug to the remote 
control terminal.
 
Connect the plug as shown in the 
illustration.
 
To disconnect the plug, grasp the 
plug’s silver part and pull out.
Using the Eyepiece Cover
Connecting the Remote Switch
COP
Y
downloadlike
ArtboardArtboardArtboard
Report Bug