Canon DS126251 Manual Do Utilizador

111

In the d/s/f/a/F shooting 
modes, you can press the <D> button 
to pop-up and fire the built-in flash 
whenever desired. If the built-in flash 
has popped up, you can push it back 
down with your fingers. In the <1> (Full 
Auto) mode, the built-in flash fires 
automatically (p.50). In the <C> mode, 
you can set it to fire automatically or 
manually (p.53).

Using flash in the d/s/f/a/F shooting modes will set the shutter 
speed and aperture as shown below. In any shooting mode, E-TTL II autoflash 
control will take effect to suit the manually- or automatically-set aperture.

* Normally, the sync speed is set automatically within 1/250 sec. to 30 sec. to suit 

the ambient brightness. In low light, the main subject is exposed with the 
automatic flash, and the background is exposed with a slow shutter speed set 
automatically. Both the subject and background look properly exposed 
(automatic slow-speed flash sync). With slow shutter speeds, using a tripod is 
recommended.

D

d

Automatically set within 1/250 sec. - 1/60 sec.

Automatically 
set

s

Manually set within 1/250 sec. - 30 sec.

Automatically 
set

f

Automatically set
With [8C.Fn I -7: Flash sync. speed in Av 
mode] (p.207), the following options for 
automatic selection can be selected:

• 0: Auto*
• 1: 1/250 - 1/60 sec. auto
• 2: 1/250 sec. (fixed)

Set manually

a

Manually set within 1/250 sec. - 30 sec.

Set manually

F

While you hold down the shutter button, the 
exposure will continue.

Set manually

COP

Y