Canon DS126251 Manual Do Utilizador
134
A Live View Shooting
Each time you press the <B> button, the information display will
change.
change.
About the Information Display
Magnifying frame
ISO speed
Shots remaining
Exposure level indicator/
AEB range
Aperture
Shutter speed
Picture Style
Battery check
Exposure
simulation
simulation
Drive mode
White balance
Flash exposure compensation
AF mode
•d : Live mode
•c : Face detection Live mode
•f: Quick mode
•d : Live mode
•c : Face detection Live mode
•f: Quick mode
AF point (Quick mode)
AEB
FEB
FEB
Highlight tone priority
Histogram
Image-recording quality
AE lock
Flash-ready
Auto Lighting
Optimizer
The histogram can be displayed when [Expo. simulation: Enable] has
been set (p.136).
been set (p.136).
You can display the electronic level by pressing the <B> button
(p.228). Note that if the AF mode is set to [u Live mode] or the camera
is connected to a TV set with an HDMI cable, the electronic level cannot
be displayed.
(p.228). Note that if the AF mode is set to [u Live mode] or the camera
is connected to a TV set with an HDMI cable, the electronic level cannot
be displayed.
When <g> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
brightness is close to what the captured image will look like.
If <g> is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low or bright light conditions.
However, the actual movie recorded will reflect the exposure setting.
displayed at the suitable brightness due to low or bright light conditions.
However, the actual movie recorded will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram might not be properly
displayed in low- or bright-light conditions.
grayed out (for your reference). The histogram might not be properly
displayed in low- or bright-light conditions.
COP
Y