Canon DS126251 Manual Do Utilizador

244

Troubleshooting Guide

 

If the power is cut off while an image is being recorded to the card, the 
access lamp will still continue to light/blink for a few seconds. When 
the image recording is completed, the power will turn off automatically.

 

Use a fully-charged battery (p.24).

 

The battery performance might have degraded. See the [7 Battery 
info.] menu to check the battery’s performance level (p.230). If the 
battery performance is poor, replace the battery pack with a new one.

 

If you keep displaying the Quick Control screen (p.38) or shooting Live 
View shooting or movie shooting (p.131, 149) for a prolonged period, 
the number of possible shots will decrease.

 

Auto power off is in effect. If you do not want auto power off to take 
effect, set [5 Auto power off] to [Off].

 

The card is not properly inserted (p.29).

 

If the card is full, replace the card or delete unnecessary images to 
make room (p.29, 179).

 

If you try to focus in One-Shot AF mode while the focus confirmation 
light <o> in the viewfinder blinks, a picture cannot be taken. Press the 
shutter button halfway again to focus, or focus manually (p.35, 92).

 

Install a recharged battery pack in the camera (p.26).

The access lamp still blinks even when the power switch is set to <2>.

COP

Y