Canon DS126251 Manual Do Utilizador

Página de 276
247
Troubleshooting Guide
 
If the card’s writing speed is slow, movie shooting may stop 
automatically. Use a card with a read/write speed of at least 8 MB per 
sec. To find out the card’s read/write speed, see the card 
manufacturer’s Web site.
 
If the movie file size reaches 4 GB or if the movie recording time 
reaches 29 min. 59 sec., movie shooting will stop automatically.
 
If you operate the camera’s dial or lens during movie shooting, the 
respective operation noise will also be recorded. Use an external 
microphone (commercially available) (p.158).
 
In low temperatures, the display speed of the AF points may become 
slower due to the AF point display device’s (liquid crystal) 
characteristics. The display speed will return to normal at room 
temperature.
 
If the LCD monitor is dirty, use a soft cloth to clean it.
 
In low or high temperatures, the LCD monitor display may seem slow 
or might look black. It will return to normal at room temperature.
 
In fully-automatic modes (1/C), some tabs and options are not 
displayed. Set the shooting mode to d/s/f/a/F (p.40).
The movie shooting terminates by itself.
When the movie is played, camera operation noise can be heard.
Display & Operation Problems
In the viewfinder, the AF point display speed is slow.
The LCD monitor does not display a clear image.
The menu screen shows few tabs and options.
COP
Y