Canon DS126251 Manual Do Utilizador

37

Basic Operation

Before using the <

5

> dial, set the Quick Control Dial switch to <J>.

After pressing a button, turn the 
<5> dial.

When you press a button, its function 
remains selected for 6 seconds (9). 
During this time, you can turn the <

5

> 

dial to set the desired setting.
When the function turns off or if you 
press the shutter button halfway, the 
camera will be ready to shoot.

 

Use this dial to select or set the white 
balance, drive mode, flash exposure 
compensation, AF point, etc.

Turn the <5> dial only.

While looking at the viewfinder or LCD 
panel, turn the <

5

> dial to set the 

desired setting.

 

Use this dial to set the exposure 
compensation amount, the aperture 
setting for manual exposures, etc.

Turn on (9)/off the LCD panel 
illumination by pressing the <U> button. 
During a bulb exposure, pressing the 
shutter button completely will turn off the 
LCD panel illumination.

5

U

You can do step (1) even when the Quick Control Dial switch is set to 
<R>.

COP

Y