Canon DS126251 Manual Do Utilizador
61
3
Setting the Image-recording Quality
If the current recording quality is JPEG only, you can press the <P>
button to also capture a RAW image (1 by default) at the same
time. If the current recording quality is RAW only, press the button to
also capture a JPEG image (73 by default).
This button will not work if the camera is already set (p.58) to
capture RAW and JPEG images at the same time.
button to also capture a RAW image (1 by default) at the same
time. If the current recording quality is RAW only, press the button to
also capture a JPEG image (73 by default).
This button will not work if the camera is already set (p.58) to
capture RAW and JPEG images at the same time.
1
Select [One-touch RAW+JPEG].
Under the [y] tab, select [One-
touch RAW+JPEG], then press
<0>.
touch RAW+JPEG], then press
<0>.
2
Select RAW or JPEG.
Turn the <5> dial and select RAW or
JPEG, then press <0>.
JPEG, then press <0>.
3
Select the image-recording
quality.
quality.
Turn the <5> dial to select the image-
recording quality, then press <0>.
recording quality, then press <0>.
4
Take the picture.
Press the <P> button.
X
The image-recording quality will blink
on the LCD panel. To cancel the
setting, press the <P> button again.
on the LCD panel. To cancel the
setting, press the <P> button again.
Press the shutter button completely to
take the picture.
take the picture.
X
After the picture is taken, the setting
will be canceled.
will be canceled.
One-touch RAW+JPEGN
This setting can also be combined with white balance bracketing and AEB shooting.
You can also cancel the setting by pressing the <Q>, <M>, <A>,
or <x> button or operating the Live View shooting/Movie shooting
switch or power switch.
or <x> button or operating the Live View shooting/Movie shooting
switch or power switch.
COP
Y