Canon DS126251 Manual Do Utilizador
85
f
: Selecting the AF ModeN
Suited for still subjects. When you
press the shutter button halfway, the
camera will focus only once.
press the shutter button halfway, the
camera will focus only once.
When focus is achieved, the AF point
which achieved focus will be
displayed, and the focus confirmation
light <o> in the viewfinder will also
light.
which achieved focus will be
displayed, and the focus confirmation
light <o> in the viewfinder will also
light.
With evaluative metering, the
exposure setting will be set at the
same time focus is achieved.
exposure setting will be set at the
same time focus is achieved.
While you hold down the shutter
button halfway, the focus will be
locked. You can then recompose the
shot if desired.
button halfway, the focus will be
locked. You can then recompose the
shot if desired.
In the d/s/f/a/F shooting
modes, AF is also possible by
pressing the <p> button.
modes, AF is also possible by
pressing the <p> button.
One-Shot AF for Still Subjects
Focus confirmation light
AF point
If focus cannot be achieved, the focus confirmation light <o> in the
viewfinder will blink. If this occurs, a picture cannot be taken even if the
shutter button is pressed completely. Recompose the picture and try to
focus again. Or see “When Autofocus Fails” (p.92).
viewfinder will blink. If this occurs, a picture cannot be taken even if the
shutter button is pressed completely. Recompose the picture and try to
focus again. Or see “When Autofocus Fails” (p.92).
If the [1 Beep] menu is set to [Off], the beeper will not sound when
focus is achieved.
focus is achieved.
COP
Y