Schneider Electric SR2MAN01 Manual Do Utilizador

PARAMETERS Menu

52

SR2MAN01 11/2007

Functions with parameters in FBD mode:

z

Numerical Constant-Type Inputs,

z

Clocks,

z

Gain,

z

Timers: TIMER A/C, TIMER B/H, TIMER Li,

z

Counters: PRESET COUNT,

z

Fast counter,

z

CAM block.

To access the parameters of the FBD blocks, you must know end enter the block 
number. This number appears in the programming software on the wiring sheet at 
the top right corner of the block.

Only those functions used in the program and with parameters are listed in the 
PARAMETERS menu.

Parameter modification procedure:

It is therefore possible to modify parameters in RUN mode dynamically as long as 
they are not locked.

The modifications can be made: 

z

From the 

PARAMETERS (see PARAMETERS Menu, p. 51) menu, 

z

From the 

MONITORING (see MONITORING Menu, p. 53) (LD) menu: Move the 

pointer over the function to be modified using the navigation keys and open the 
parameters window from the contextual menu (

Shift key). 

1

Place the cursor over the 

PARAMETERS menu in the main menu (PARAMETERS 

flashing) and confirm by pressing the 

Menu/OK button.

Result: The parameters window opens to the first parameter.

2

Select the function to modify.
To access the required function, scroll through the function block numbers 

(navigation keys   and  ) until you reach the right one.

3

Select the parameter to modify.

The   and   keys are used to place the cursor over the parameter to modify.

4

Modify the parameter using the 

+ and - keys (  and  ) of the contextual menu.

5

Confirm the modifications by pressing 

Menu/OK, which will open the confirmation 

window.

6

Confirm again twice by pressing 

Menu/OK to save.

Result: The display returns to the INPUTS-OUTPUTS screen in RUN mode and to 
the MAIN menu in STOP mode.