ZyXEL ADSL Prestige 2602R-61 VoIP 91-006-024004B Manual Do Utilizador

Prestige 2602R Series User’s Guide

Chapter 16 Universal Plug-and-Play (UPnP)

181

The following table describes the fields in this screen.

This section shows how to install UPnP in Windows Me and Windows XP.  

Follow the steps below to install the UPnP in Windows Me. 

1 Click Start and Control Panel. Double-click Add/Remove Programs.

2 Click on the Windows Setup tab and select Communication in the Components 

selection box. Click Details.  

Table 54   Configuring UPnP

Enable the Universal Plug 

and Play (UPnP) Service 

Select this checkbox to activate UPnP. Be aware that anyone could use 

a UPnP application to open the web configurator's login screen without 

entering the Prestige's IP address (although you must still enter the 

password to access the web configurator).

Allow users to make 

configuration changes 

through UPnP

Select this check box to allow UPnP-enabled applications to 

automatically configure the Prestige so that they can communicate 

through the Prestige, for example by using NAT traversal, UPnP 

applications automatically reserve a NAT forwarding port in order to 

communicate with another UPnP enabled device; this eliminates the 

need to manually configure port forwarding for the UPnP enabled 

application. 

Allow UPnP to pass through 

Firewall

Select this check box to allow traffic from UPnP-enabled applications to 

bypass the firewall. 
Clear this check box to have the firewall block all UPnP application 

packets (for example, MSN packets).

Apply

Click Apply to save the setting to the Prestige.

Cancel

Click Cancel to return to the previously saved settings.