ZyXEL ADSL Prestige 2602R-61 VoIP 91-006-024004B Manual Do Utilizador

Códigos do produto
91-006-024004B
Página de 450
Prestige 2602R Series User’s Guide
290 
Chapter 30 Filter Configuration
30.4  Configuring a Filter Rule
To configure a filter rule, type its number in Menu 21.1.x – Filter Rules Summary and press 
[ENTER] to open menu 21.1.x.1 for the rule.
There are two types of filter rules: TCP/IP and Generic. Depending on the type of rule, the 
parameters for each type will be different. Use [SPACE BAR] to select the type of rule that 
you want to create in the Filter Type field and press [ENTER] to open the respective menu.
To speed up filtering, all rules in a filter set must be of the same class, for instance, protocol 
filters or generic filters. The class of a filter set is determined by the first rule that you create. 
When applying the filter sets to a port, separate menu fields are provided for protocol and 
device filter sets. If you include a protocol filter set in a device filters field or vice versa, the 
Prestige will warn you and will not allow you to save.
30.4.1  TCP/IP Filter Rule
This section shows you how to configure a TCP/IP filter rule. TCP/IP rules allow you to base 
the rule on the fields in the IP and the upper layer protocol, for example, UDP and TCP 
headers.
To configure TCP/IP rules, select TCP/IP Filter Rule from the Filter Type field and press 
[ENTER] to open Menu 21.1.x.x – TCP/IP Filter Rule, as shown next.
Figure 173   Menu 21.1.x.x TCP/IP Filter Rule
              Menu 21.1.1.1 - TCP/IP Filter Rule
         Filter #: 1,1
         Filter Type= TCP/IP Filter Rule
         Active= No
         IP Protocol= 0     IP Source Route= No
         Destination: IP Addr=
                      IP Mask=
                      Port #=
                      Port # Comp= None
              Source: IP Addr=
                      IP Mask=
                      Port #=
                      Port # Comp= None
         TCP Estab= N/A
         More= No           Log= None
         Action Matched= Check Next Rule
         Action Not Matched= Check Next Rule
         Press ENTER to Confirm or ESC to Cancel: