ZyXEL ADSL Prestige 2602R-61 VoIP 91-006-024004B Manual Do Utilizador

Prestige 2602R Series User’s Guide

Chapter 31 SNMP Configuration

301

Figure 183   Menu 22 SNMP Configuration

The following table describes the SNMP configuration parameters.

The Prestige will send traps to the SNMP manager when any one of the following events 
occurs:

Menu 22 - SNMP Configuration

SNMP:
  Get Community= public
  Set Community= public
  Trusted Host= 0.0.0.0
  Trap:
    Community= public
    Destination= 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

Table 99   Menu 22 SNMP Configuration 

SNMP:

Get Community

Type the Get Community, which is the password for the incoming Get- and 

GetNext requests from the management station.

Set Community

Type the Set community, which is the password for incoming Set requests from 

the management station. 

Trusted Host

If you enter a trusted host, your Prestige will only respond to SNMP messages 

from this address. A blank (default) field means your Prestige will respond to all 

SNMP messages it receives, regardless of source.

Trap:

Community

Type the trap community, which is the password sent with each trap to the 

SNMP manager. 

Destination

Type the IP address of the station to send your SNMP traps to.

When you have completed this menu, press [ENTER] at the prompt “

Press ENTER to Confirm 

or ESC to Cancel:

”  to save your configuration, or press [ESC] at any time to cancel.

Table 100   SNMP Traps 

1

coldStart (defined in RFC-1215)

A trap is sent after booting (power on).

2

warmStart (defined in RFC-1215)

A trap is sent after booting (software reboot).

3

linkDown (defined in RFC-1215)

A trap is sent with the port number when any of the 

links are down. See the following table.

4

linkUp (defined in RFC-1215)

A trap is sent with the port number.