ZyXEL ADSL Prestige 2602R-61 VoIP 91-006-024004B Manual Do Utilizador

Prestige 2602R Series User’s Guide

Chapter 34 System Maintenance

327

The total budget is the time limit on the accumulated time for outgoing calls to a remote node. 
When this limit is reached, the call will be dropped and further outgoing calls to that remote 
node will be blocked. After each period, the total budget is reset. The default for the total 
budget is 0 minutes and the period is 0 hours, meaning no budget control. You can reset the 
accumulated connection time in this menu by entering the index of a remote node. Enter 0 to 
update the screen. The budget and the reset period can be configured in menu 11.1 for the 
remote node when PPPoE encapsulation is selected. 

 The Prestige keeps track of the time and date. There is also a software mechanism to set the 
time manually or get the current time and date from an external server when you turn on your 
Prestige. Menu 24.10 allows you to update the time and date settings of your Prestige. The real 
time is then displayed in the Prestige error logs and firewall logs. 

Select menu 24 in the main menu to open Menu 24 System Maintenance, as shown next. 

Figure 205   Menu 24 System Maintenance

Then enter 10 to go to Menu 24.10  System Maintenance  Time and Date Setting to update 
the time and date settings of your Prestige as shown in the following screen.

Table 109   Menu 24.9.1 System Maintenance: Budget Management 

Remote Node

Enter the index number of the remote node you want to reset (just one in 

this case)

Connection Time/Total 

Budget

This is the total connection time that has gone by (within the allocated 

budget that you set in menu 11.1.

Elapsed Time/Total Period

The period is the time cycle in hours that the allocation budget is reset 

(see menu 11.1.) The elapsed time is the time used up within this period.

Enter “0” to update the screen or press [ESC] to return to the previous screen.

Menu 24 - System Maintenance

            1.  System Status
            2.  System Information and Console Port Speed
            3.  Log and Trace
            4.  Diagnostic
            5.  Backup Configuration
            6.  Restore Configuration
            7.  Upload Firmware
            8.  Command Interpreter Mode
            9.  Call Control
            10. Time and Date Setting
            11. Remote Management

Enter Menu Selection Number: