ZyXEL ADSL Prestige 2602R-61 VoIP 91-006-024004B Manual Do Utilizador

Prestige 2602R Series User’s Guide

62 

Chapter 3 Wizard Setup

Use this screen to configure the voice settings (for the Prestige’s SIP account one) with the 
information from your voice service provider.

Figure 15   Wizard Setup: Third Screen 

The following table describes the fields in this screen.

Table 9   Wizard Setup: Voice Configuration 

Active

Select this check box to have the Prestige use this SIP account. Clear the 

check box to have the Prestige not use this SIP account.

SIP Number

Enter your SIP number in this field (use the number or text that comes before 

the @ symbol in a full SIP URI).  You can use up to 127 ASCII characters.

SIP Local Port

Use this field to configure the Prestige’s listening port for SIP. Leave this field 

set to the default if you were not given a local port number for SIP.

SIP Server Address

Type the IP address of the SIP server in this field. It doesn’t matter whether 

the SIP server is a proxy, redirect or register server.

SIP Server Port

Enter the SIP server’s listening port for SIP in this field. Leave this field set to 

the default if your VoIP service provider did not give you a server port number 

for SIP.

REGISTER Server 

Address

Enter the SIP register server’s address in this field. 

Note: If you were not given a register server address, then 

enter the address from the SIP Server Address field 
again here.