Pelco System 9760 Manual Do Utilizador

30

C1572M (9/05)

After installation of the 9760 system is complete, verify system operation. To do so, perform the following from a CM9760-KBD:

1. Verify that the CM9760-KBD LCD displays the following: 

SYSTEM 97XX

2. Enter the default operator password on the CM9760-KBD keypad: The default password for operator 1 is 0101; the default password for 

operator 2 is 0202; the default password for operator 3 is 0303, and so on. The passwords are defined in the Operator PIN field in 
CM9700-MGR.

The LCD displays the following:

ENTER MONITOR #

3. Enter the number of the monitor you are viewing—for example, 1—and then press the MON key. 

4. Enter a camera number, and then press the CAM key.

5. Press the FWD key to advance through cameras and verify switching. 

For detailed information about 9760 system operation using the CM9760-KBD, refer to the CM9760-KBD/KBR Keyboard Installation/Operation 
manual.

NOTE:  Depending on the version of the CM9760-KBD software, the LCD displays SYSTEM 9760 or SYSTEM 9700.