Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Panasonic
  4. W1014HM0-YI
  5. Manual Do Utilizador

Panasonic W1014HM0-YI Manual Do Utilizador

Download
Página de 119
– 84 –
Chapter 10 Menu Operations — Menu list
Menu list
[SYSTEM SETTINGS]
Sets the system in general.
 
f
 is the extended menu. Set [MENU] → [CAMERA SETTINGS] → [Enhanced] → [Enhanced SW] to [ON] to display the extended menu.
Item
Description of settings
[SYSTEM MODE]
[FREQUENCY]
Sets the system frequency.
If the setting of this item is changed, the device must be restarted. If a restart is required, a confirmation 
dialog will be shown.
The camera’s system operation are determined by three settings: [FREQUENCY], [PIXEL], and [MAIN 
CODEC]. Check to see if the three settings are matched.
[23.98p], [25.00p], [29.97p], [50.00p], [59.94p]
 
f
Factory setting: [23.98p]
[PIXEL]
Sets the main recorder’s number of recording pixels.
[4096×2160], [3840×2160], [1920×1080]
 
f
Factory setting: [4096×2160] 
[MAIN CODEC]
Sets the main recorder’s recording codec. Selectable items vary depending on the [FREQUENCY]/[PIXEL] 
setting.
[AVC-Intra4K 422], [AVC-Intra100]
 
f
Factory setting: [AVC-Intra4K 422] 
[SUB CODEC]
Sets the sub recorder’s recording codec. Selectable items vary depending on the [FREQUENCY]/[PIXEL] 
setting.
At the same time, this enables/disables proxy data recording.
[AVC-Intra2K 422], [AVC-Intra100], [AVC-LongG50], [AVC-LongG25], [AVC-Intra2K 422 & Pxy], 
[AVC-Intra100 & Pxy], [AVC-LongG50 & Pxy], [AVC-LongG25 & Pxy], [OFF]
 
f
Factory setting: [AVC-Intra2K 422]
[COLOR SETTING]
[MAIN]
Sets the colors of videos (entire camera system) recorded in the main recorder.
[V-Log]/[V-709]/[3D LUT]
 
f
Factory setting: [V-Log]
[GRADING]
Sets whether to apply the grading process.
This only enabled when [V-Log] is set in [MAIN].
[ON], [OFF]
 
f
Factory setting: [OFF]
[SUB]
Sets the colors of videos (entire camera system) recorded in the sub recorder.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [ON]
[V-Log]/[GRADING]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [V-709]
[V-709]
When [MAIN] is set to [3D LUT]
[3D LUT]
 
f
Factory setting: [V-Log]
[3D LUT]
Sets the grading process method when [GRADING] is set to [ON].
When [GRADING] is set to [ON]
[OFF]/[V-709]/[LOADED FILE]/[FILE SEL]
When [GRADING] is set to [OFF]
[OFF]
 
f
Factory setting: [OFF]
[CDL]
Sets the grading process method when [GRADING] is set to [ON].
When [GRADING] is set to [ON]
[ON], [OFF]
When [GRADING] is set to [OFF]
[OFF]
 
f
Factory setting: [OFF]
[MON 1]
Sets the output image from the <MON OUT1> terminal.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [ON]
[V-Log]/[GRADING]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [V-709]
[V-709]
When [MAIN] is set to [3D LUT]
[3D LUT]
 
f
Factory setting: [V-Log]