Panasonic W1014HM0-YI Manual Do Utilizador

– 95 –

[A.IRIS WINDOW]

Selects the auto iris detection window.

[NORMAL1]: Window that is near screen center.

[NORMAL2]: Window that is near screen bottom.

[CENTER]: Window that is a spot in the screen center.

 

f

Factory setting: [NORMAL1]

[A.IRIS PEAK/AVE]

Sets the ratio included in the peak for auto iris standard.

 

f

Factory setting: [30]

[LENS CONNECT 

TYPE]

Sets the type of lens to be connected.

[TYPE B]: Lens controlled with 12-pin connector

[TYPE C]: Lens controlled with cooke/i communication

[OFF]: Other lenses

 

f

Factory setting: [OFF]

The various setting items of the recording function of the camera.

[FILE SPLIT]

Sets whether to split the recording file by units of 4 GB or just maintain one file, when the following two 

conditions are met:

 

f

When OP-1b format codec is selected in [MENU] → [SYSTEM SETTINGS] → [SYSTEM MODE] → 

[MAIN CODEC]/[SUB CODEC].

 

f

When the recording size exceeds 4 GB

[ONE FILE]: Records in one file.

[SPLIT]: Splits the clip every 4 GB.

 

f

Factory setting: [SPLIT]

When [MAIN CODEC] is in the OP-Atom format, [SUB CODEC] is also fixed to [SPLIT].

[TC]

[SET TC]

Sets the default value of the time code to record.

Hour: 

Minute: 

Second: 

Frame: 

[00] - [23] (for [48p], [24p], [23.98p]), [00] - [23] (for [50i], [50p], [25p]), [00] - [29] (for [59.94i], 

[59.94p], [29.97p])

 

f

Factory setting: [00] (various items)

[SET UB]

Sets user bits. Enabled only when [USER] is selected in [UB MODE].

This can be set by each digit from [00] to [FF].

 

f

Factory setting: [00]

[TC/UB/Dur.]

Switches the time code display to the user bits and duration counter display.

 

f

Factory setting: [TC]

[FREE/REC RUN]

Sets the operation mode to advance the built-in time code generator.

[FREE RUN]: Advances regardless of the operation mode.

[REC RUN]: Advances when recording is in process.

 

f

Factory setting: [FREE RUN]

[DF/NDF]

Sets count method for the built-in time code generator of the camera.

[DF]: Uses the drop frame mode.

[NDF]: Uses the non-drop frame mode.

 

f

Factory setting: [DF]

Enabled only when [59.94i], [59.94p], or [29.97p] is selected in [MENU] → [SYSTEM SETTINGS] → 

[SYSTEM MODE] → [FREQUENCY].

[UB MODE]

Selects the user bits mode.

[FRAME RATE]: Selects camera imaging information (such as frame rate).

[USER]: Selects the user bits value that has been set.

[EXT INPUT]: Records the user bits values currently input to the <TC IN/OUT> terminal.

[TIME]: Selects the local time. (hh, mm, ss)

[DATE]: Selects the local date and time. (YY, MM, DD, hh)

 

f

Factory setting: [FRAME RATE]

[TC IN/OUT SEL]

Sets the input/output of the <TC IN/OUT> terminal.

 

f

Factory setting: [TC OUT]

[TC OUT]

Selects the time code output to the <TC IN/OUT> terminal.

 

f

Factory setting: [TCG]

[TC OUT REF]

Sets the output delay of the time code output from the <TC IN/OUT> terminal.

 

f

Factory setting: [RECORDING]

[REC METADATA]

[LOAD]

Loads the metadata upload file saved to the SD memory card.

[RECORD]

Sets whether to add loaded metadata at a recording.

[ON]: Adds metadata.

[OFF]: Does not add metadata.

 

f

Factory setting: [OFF]