Panasonic W1014HM0-YI Manual Do Utilizador
– 98 –
Chapter 10 Menu Operations — Menu list
Item
Description of settings
[FOCUS SQUARES SW] Displays/hides the focus square function.
[ON], [OFF]
f
Factory setting: [OFF]
[EXPAND POS]
Adjusts the source signal position in an enlarged display.
[0]…[8]
f
Factory setting: [4]
[EXPAND VALUE]
Adjusts the enlargement factor.
[x2], [x3], [x4]
f
Factory setting: [x2]
[EXPAND MODE]
Sets the enlargement display function mode.
[10SEC], [HOLD], [UNTIL REC]
f
Factory setting: [10SEC]
[PEAKING]
Sets the peaking function mode.
[LOW], [MID], [HIGH]
f
Factory setting: [LOW]
[COLOR]
Sets the peaking function color.
[RED], [GREEN], [WHITE]
f
Factory setting: [RED]
[MONO SW]
Enables/disables the monochromatic display function when [ADVANCED ASSIST SW] is set to [ON].
[ON], [OFF]
f
Factory setting: [OFF]
[FOCUS BAR SW]
Enables/disables the focus bar display function.
[ON], [OFF]
f
Factory setting: [ON]
[SURROUND VIEW]
[VIEW SW]
Enables/disables the surround view function (the function to display the image outside the effective range
on the viewfinder).
[ON], [OFF]
f
Factory setting: [OFF]
[LINE SW]
Enables/disables the effective area line mark display function.
[ON], [OFF]
f
Factory setting: [ON]
[LINE COLOR]
Sets the effective area line mark color.
[BLACK], [WHITE]
f
Factory setting: [WHITE]
[MASK SIGNAL]
Sets the microphone level for the surround signal.
[OFF], [75%], [50%], [25%]
f
Factory setting: [OFF]
[VF SDI DISPLAY]
[VF SDI 1080p to 1080i]
Sets whether to output 1080i signals from the <VF SDI> terminal.
[ON], [OFF]
f
Factory setting: [OFF]
[SMOOTH MODE]
Enables/disables the smooth mode (function which smoothens the viewfinder image when 24P and half
shutter function is running).
[ON], [OFF]
f
Factory setting: [OFF]
[WFM]
Displays/hides waveform monitor.
[ON]/[OFF]
[ON]/[OFF]
f
Factory setting: [OFF]
[PERIPHERAL]
Applies settings related to functions used in conjunction with peripheral devices, such as network and GPS devices. Network functions will be supported
in future versions.
in future versions.
Item
Description of settings
[GPS]
Configures internal GPS settings.
[ON]: Activates the GPS operation. Outputs the location information as a signal to the <SDI OUT> terminal
and records it as clip metadata.
[OFF]: Does not activate the GPS operation. Does not output and record the location information.
f
Factory setting: [ON]