Toshiba TOSHIBA NB100 Manual Do Utilizador

Página de 211
4.4 Display Assembly 
4 Replacement Procedures 
4.4  Display Assembly 
Removing the Display Assembly 
CAUTION:  Use care to avoid that the antenna cable is not caught between the display 
assembly and computer. 
Remove the display assembly according to the following procedures and Figures 4-8, 4-9.  
1.  Turn the computer upside down and remove two M2.5x10 black flat head screws. 
2.  Restore the normal computer placement and open the display panel. 
M2.5 X 10 black flat-head screw
 
Figure 
 
4-8 Removing the screws from the back of the computer 
3.  Disconnect the LCD/FL cable from CN3 on the system board. 
4.  Disconnect the Speakers cable from CN7 on the system board. 
5.  Remove two M2.5x 10 black flat-head screws securing the LCD module to the 
bottom cover. 
6.  Remove the wireless antenna cables, Speakers cable and LCD/FL cable from the 
bottom cover. 
 
TOSHIBA NB100 Maintenance Manual                                                                                                                         
4-19