Toshiba TOSHIBA NB100 Manual Do Utilizador
4 Replacement Procedures
4.6 SSD/HDD and Fan
4.6 SSD/HDD and Fan
Removing the SSD/HDD and Fan
CAUTION: Do not press on the top or bottom of the drive.
Applying such pressure can either corrupt the data in the drive or
damage the drive.
Applying such pressure can either corrupt the data in the drive or
damage the drive.
Remove the SSD/HDD (hard disk drive) and Fan according to the following procedures and
Figures 4-12, 4-13 , 4-14.
Figures 4-12, 4-13 , 4-14.
1. Remove the two M2.5 x 4 flat-head screws on the SSD/HDD pack.
2. Remove the SSD/HDD pack by pulling on the tab attached to the pack.
3. Remove one M2.5 x 7 black flat-head screw on the Fan.
4. Disconnect the Fan cable form CN9.
5. Remove Fan.
M2.5 x 4 black flat-head screw
M2.5 X 7 black flat-head screw
CN9
Figure 4-12 Removing the HDD pack
NOTE: Do not disassemble the HDD pack when it is working normally.
Disassemble or replace the HDD pack only if it fails.
Disassemble or replace the HDD pack only if it fails.
4-24 TOSHIBA NB100 Maintenance Manual