TANDBERG 5000 Manual Do Utilizador

When a still image is sent, received or requested, it will be stored in the graphics memory.

One high-quality image (4xCIF) can be stored in memory. When a new image is sent or received, the old

image will be overwritten.

• Press 

. The outgoing video is frozen when ‘Freeze’ is displayed on the screen. The video remains

frozen until the key

 is pressed again (not if calling to a dual monitor system).

If a still image from another video source is sent, please check your ‘Presentation Settings’. See below.

Using a dual monitor system and with ‘Dual Monitor: On’ selected in the Video Output menu, the still image is
automatically shown on the dual monitor until 

 is pressed. Use

to toggle between selfview and still image

on the dual monitor.

• To send a still image from another video source (e.g. the document camera), press 

 , use 

 and 

to highlight the video source and press 

. See ‘Presentation Settings’ below for automatic setup of

this operation.

Press 

 until the ‘FarEndCamera’ on screen indicator is displayed.

• Press 

. The still image is automatically displayed, press any key to return to normal view (single

monitor).

Use

to toggle between selfview and still image on the dual monitor.

• To request a still image from another video source, press 

 , use 

 and 

 to highlight the video

source and press 

 .