TANDBERG 5000 Manual Do Utilizador

Vision 5000: Video Input 5

VCR: Video Output

Vision 5000: Video Output 2

VCR: Video Input

Vision 5000: Audio Output 3

VCR: Audio Input

Vision 5000: Audio Input 6

VCR: Audio Output

For playback, connect a cable between Video Out on the VCR and ‘VideoIn 5 (VCR)’ on the system and

from Audio Out on the VCR to ‘AudioIn 6 (VCR)’ on the system.

Select correct video input on the system using 

. Make sure that ‘Audio In 6 (VCR)’ is On (see ‘Audio

Setup’. If audio from VCR is too low, this level can be adjusted in ‘Audio Setup’, ‘Inputs’, ‘Level Settings’.

The audio from the VCR will be audible in the local speaker system.

The audio from the VCR and your microphone(s) will be mixed and sent to the other side. When a person

talks the VCR level will be reduced to make it easier to comment a video recording (when ‘Audio Setup’,

‘Mix Mode: Auto’).

When recording, the VCR will record the video as showed on the main monitor, the local audio and the

audio from the other side.

When recording a videoconference, connect a cable between ‘VideoOut 2’ on the system and Video In on

the VCR. Connect a cable between ‘AudioOut 3’ on the Vision 5000 to Audio In on the VCR.

To simplify connecting a VCR, the
necessary connectors are marked ‘VCR’