Sterling SVL-C Manual Do Utilizador

SVL-A, SVL-B, SVL-C, & SVL-D Self-Contained Material Loaders - Venturi Style  8 of 49 

•  Please read this manual carefully before initial operation.  Understanding the 

instructions and equipment will help to avoid injuries as well as damage to 
equipment.  If you have questions, contact the manufacturer. 

•  The operators of this unit must be at least 16 years old. 
•  Store this manual near the site of the machine so that it is readily available to 

the operators.  Faulty operation may lead to accidents! 

•  The manual in provided on a CD making it possible to reprint the manual 

should an existing copy be damaged or destroyed.  

•  Note that, for reasons of brevity, not every possible case of operation or 

maintenance can be mentioned in this manual. 

•  Be aware of all safety instructions and danger signs on the unit.  This will 

avoid injuries and damage to material. 

•  Prepare precise instructions of the unit using this manual.  Faulty operation 

can lead to accidents! 

• Only 

PROPERLY TRAINED individuals familiar with the information in this 

manual should use this equipment. 

•  Proper clothing should be worn at all times in order to avoid injuries. 
•  Compare the connected loads to those of the main supply to avoid electrical 

shock. 

•  When using lifting gear, pay close attention to the corresponding instructions 

to avoid accidents. 

•  Operate this equipment within the local regulations and requirements of the 

plant. 

•  NEVER modify or alter the unit without the manufacturer’s permission.  

• 

If the unit has been switched off for safety reasons, it must be protected from 
unauthorized use.  

 

•  The unit is exclusively intended for conveying plastic granules and regrind.  

Any other usage is not permitted. 

• 

This unit is not suitable for processing foods.

 

• 

Attachments that are not delivered by the manufacturer must be constructed 
according to the safety standard EN 294.

 

• 

Check all lines, hoses, and coupling pieces regularly for leakage and 
damage.  Any errors must be eliminated immediately.

 

• 

The unit may only be used if all corresponding components have been 
properly connected and are in accordance with relevant regulations.