Jenn-Air JDRP430 Manual Do Utilizador

Página de 72
17
OVEN USE
Odors and smoke are normal when the oven is used the first few 
times, or when it is heavily soiled.
During oven use, the heating elements will not remain on, but will 
cycle on and off throughout oven operation.
IMPORTANT: The health of some birds is extremely sensitive to 
the fumes given off. Exposure to the fumes may result in death to 
certain birds. Always move birds to another closed and well- 
ventilated room.
Aluminum Foil
IMPORTANT: To avoid permanent damage to the oven bottom 
finish, do not line the oven bottom with any type of foil or liner.
For best cooking results, do not cover entire rack with foil 
because air must be able to move freely.
To catch spills, place foil on rack below dish. Make sure foil is 
at least ½" (1.3 cm) larger than the dish and that it is turned 
up at the edges.
Positioning Racks and Bakeware
IMPORTANT: To avoid permanent damage to the porcelain 
finish, do not place food or bakeware directly on the oven door or 
bottom.
RACKS
Position racks before turning on the oven. 
Do not position racks with bakeware on them. 
Make sure racks are level. 
BAKEWARE
To cook food evenly, hot air must be able to circulate. Allow 
2" (5.0 cm) of space around bakeware and oven walls. 
Extendable Roller Rack
The extendable roller rack allows easy access to position and 
remove food in the oven. It can be used in rack positions 1 
through 4. The extendable roller rack will not fit in position 5.
Open Position
Closed and Engaged Position
To Remove the Extendable Roller Rack:
1. Slide the rack in completely so that it is closed and engaged 
with the sliding shelf.
2. Using 2 hands, lift up on the front edge of the rack and the 
sliding shelf together. Slowly push both to the back wall of the 
oven so the front edge of the sliding shelf sits on the rack 
guide located on the sides of the oven.
The front edge of the rack and the sliding shelf should be 
higher than the back edge.
3. Using 2 hands, lift up the back of the rack and the sliding 
shelf so that the back and front are level on the rack guide.
4. Pull the rack and the sliding shelf out.
To Replace Extendable Roller Rack
1. Using 2 hands, grasp the front of the closed rack and the 
sliding shelf. Place the closed rack and the sliding shelf on 
the rack guide.
2. Slowly push the rack and the sliding shelf to the back of the 
oven until the back edge of the sliding shelf drops.
A. Extendable roller rack
B. Sliding shelf
1
2
3
4
5
A
B
A. Extendable roller rack
B. Sliding shelf
A. Sliding shelf
B. Rack guide
C. Extendable roller rack
B
A
B
A
C