Jenn-Air JDRP430 Manual Do Utilizador

Página de 72
24
Food should be completely thawed.
Cover foods to keep food moist.
Prior to slow roasting, meat can be pan seared or broiled on 
sides to enhance browning, flavor and tenderness.
Use rack position 2 for best results.
To Use Convect Slow Roast:
Before using Convect Slow Roast, see “Positioning Racks and 
Bakeware” section.
1. Place food in oven.
2. Touch MODES to move to the Modes menu.
3. From the Modes menu, touch CONVECT SLOW ROAST.
4. Touch the Temperature tab to move to the Temperature 
screen. 
Use the slider to enter a desired cooking temperature or 
press the -5°F (-1°C) or +5°F (+1°C) buttons. The temperature 
can be between 170°F (77°C) and 300°F (150°C). The 
temperature range you select from is based on the selected 
cook time.
5. Touch START to begin cooking.
OR
6. If a programmed cook time is desired, touch TIMER NOT SET 
to enter the Cook Timer screen. Enter a cooking length using 
the on-screen number keyboard to set a timer to alert when 
cooking ends. The cook time may not exceed 12:00:00. The 
oven will turn off when the cook time expires. 
7. (Optional) To keep food warm after a programmed cook timer 
ends, press KEEP WARM ON from the Cook Timer screen. 
See the “Keep Warm™ Option” section for additional 
information. 
8. (Optional) To set a delayed start with a cook time, touch the 
TIMER NOT SET/COOK TIMER screen and enter desired 
cook time. Select DELAY START, set desired start time and 
touch SET DELAY. To set only a delay start, touch DELAY 
START from the temperature tab, set the desired time and 
touch SET DELAY.
9. Touch START to begin cooking or to activate Delay Start.
10. To change a mode, temperature or cook time while the oven 
is active, touch the appropriate tab. Make a new selection 
and touch OK. 
11. Press CANCEL OVEN (CANCEL LEFT or CANCEL RIGHT on 
48" [121.9 cm] models) to turn off the oven.
Convect Frozen Pizza
Convect Frozen Pizza is used to bake thick or thin crust frozen 
pizzas. During Convect Frozen Pizza, the broil, convect and bake 
elements will cycle on and off in intervals to maintain oven 
temperature. The convection fans remain on continuously to 
circulate hot oven air around the pizza. 
If the oven door is opened during Convect Frozen Pizza, the fans 
turn off immediately. They will turn back on immediately after the 
door is closed. The bake, broil and convect elements will turn off 
approximately 30 seconds after the door is closed.
The bake temperature should be reduced 25°F (14°C) from 
the temperature recommended on the package.
The bake time may be slightly less than stated on the 
package, depending on the pizza.
A pizza stone may be used with the Convect Frozen Pizza 
mode.
Use Convect Frozen Pizza with 1-rack baking.
To Use the Convect Frozen Pizza Mode:
Before using Convect Frozen Pizza, see the “Positioning Racks 
and Bakeware” section. Follow package directions, reducing the 
bake temperature 25°F (14°C). If there are no rack position 
recommendations, use rack 3.
Allow the oven to preheat completely before placing your pizza in 
the oven.
1. Touch MODES to move to the Modes menu.
2. From the Modes menu, touch CVT FROZEN PIZZA. (Touch 
the down arrow if necessary to view more available modes.)
3. Touch the Temperature tab to move to the Temperature 
screen. 
Use the slider to enter a desired cooking temperature or 
press the -5°F (-1°C) or +5°F (+1°C) buttons. The temperature 
must be between 170°F (77°C) and 550°F (288°C).
4. Touch START to preheat oven.
Place frozen pizza in oven when preheat signal sounds.
OR
5. If a cook time, Keep Warm™ or Delay Start function is 
desired, touch TIMER NOT SET to enter the Cook Time 
screen or touch DELAY START from the temperature pad.
Enter a cooking length using the on-screen number keyboard 
to set a timer to alert when cooking ends. The cook time may 
not exceed 12:00:00. The oven will turn off when the cook 
time expires.
A. Convection fan
B. Broil element
C. Convection element
D. Bake element
A
B
C
D