Jenn-Air JES8860 Manual Do Utilizador

■

Cooktop Polishing Creme and Cooktop Scraper:

Rub creme into soil with damp paper towel. Hold scraper as 
flat as possible on surface and scrape. Repeat for stubborn 
spots. Polish entire cooktop with creme and paper towel.

■

Cooktop Polishing Creme:

Clean as soon as cooktop has cooled down. Rub creme into 
surface with a damp paper towel or soft cloth. Continue 
rubbing until white film disappears. The marks will not totally 
disappear but after many cleanings become less noticeable.

■

Cooktop Polishing Creme:

Rub creme into surface with a damp paper towel or soft 
cloth. Continue rubbing until white film disappears. Scratches 
and abrasions do not affect cooking performance and after 
many cleanings become less noticeable.

To avoid damage to the cooktop controls, do not use steel wool, 
abrasive cleansers or oven cleaner.

To avoid damage, do not soak knobs.

When replacing knobs, make sure knobs are in the Off position.

On some models, do not remove seals under knobs.

■

Warm, soapy water:

Pull knobs straight away from control panel to remove.

To avoid damage to the control panel, do not use abrasive 
cleaners, steel-wool pads, gritty washcloths or abrasive paper 
towels.

■

Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

■

Glass cleaner and a soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

■

Self-Cleaning cycle:

See “Self-Cleaning Cycle” first.

■

Self-Cleaning cycle:

See “Self-Cleaning Cycle” first. Remove racks or they will 
discolor and become harder to slide. If this happens, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.

■

Steel-wool pad

STORAGE DRAWER OR WARMING DRAWER (on some 
models)

Make sure drawer is cool and empty before cleaning.

For more information, see “Storage Drawer” or “Warming 
Drawer” section.

■

Mild detergent

The oven uses a 120-volt, 20-watt maximum halogen bulb. See 
the “Assistance or Service” section to order. Ask for Part Number 
74004458.

Before replacing, make sure the oven is off and cool.

1. Unplug range or disconnect power.

2. Use fingertips to grasp edge of bulb cover. Pull out and 

remove.

3. Remove bulb from socket by pulling straight out of the 

ceramic base.

4. Replace bulb, using tissue or wearing cotton gloves to handle 

bulb. To avoid damage or decreasing the life of the new bulb, 
do not touch bulb with bare fingers. 

5. Replace bulb cover by snapping back into place.

6. Plug in range or reconnect power.

The storage drawer can be removed. Before removing, make sure 
drawer is cool and empty.

1. Pull storage drawer out to the first stop position.

2. Lift up the front of the drawer and pull the drawer out to the 

second stop position.

3. Grasp sides and lift drawer top up and out.

1. Fit the ends of the drawer glides into the rails in the range.

2. Lift up the front of the drawer and gently push in to the first 

stop position.

3. Lift drawer up again and push until drawer is closed.