ZyXEL Access Point G1000 v2 91-005-124001B Manual Do Utilizador
Códigos do produto
91-005-124001B
ZyXEL G-1000 v2 User’s Guide
Chapter 16 Firmware and Configuration File Maintenance
119
C
H A P T E R
16
Firmware and Configuration File
Maintenance
This chapter tells you how to backup and restore your configuration file as well as upload new
firmware and configuration files using the SMT screens.
firmware and configuration files using the SMT screens.
16.1 Filename Conventions
The configuration file (often called the romfile or rom-0) contains the factory default settings
in the menus such as password and TCP/IP Setup, etc. It arrives from ZyXEL with a rom
filename extension. Once you have customized the G-1000 v2's settings, they can be saved
back to your computer under a filename of your choosing.
in the menus such as password and TCP/IP Setup, etc. It arrives from ZyXEL with a rom
filename extension. Once you have customized the G-1000 v2's settings, they can be saved
back to your computer under a filename of your choosing.
ZyNOS (ZyXEL Network Operating System sometimes referred to as the “ras” file) is the
system firmware and has a “bin” filename extension. With many FTP and TFTP clients, the
filenames are similar to those seen next.
system firmware and has a “bin” filename extension. With many FTP and TFTP clients, the
filenames are similar to those seen next.
ftp> put firmware.bin ras
This is a sample FTP session showing the transfer of the computer file " firmware.bin" to the
G-1000 v2.
G-1000 v2.
ftp> get rom-0 config.cfg
This is a sample FTP session saving the current configuration to the computer file config.cfg.
If your [T]FTP client does not allow you to have a destination filename different than the
source, you will need to rename them as the G-1000 v2 only recognizes “rom-0” and “ras”. Be
sure you keep unaltered copies of both files for later use.
source, you will need to rename them as the G-1000 v2 only recognizes “rom-0” and “ras”. Be
sure you keep unaltered copies of both files for later use.