ZyXEL Access Point G1000 v2 91-005-124001B Manual Do Utilizador

ZyXEL G-1000 v2 User’s Guide

Chapter 3 Wizard Setup

43

The following table describes the labels in this screen.

Note: The wireless stations and G-1000 v2 must use the same SSID, channel ID and 

WEP encryption key (if WEP is enabled) or WPA-PSK (if WPA-PSK is enabled) 
for wireless communication.

Choose Basic (WEP) security to setup WEP Encryption parameters.

Table 9   Enter Name and Select Security

Wireless LAN Setup

Name(SSID)

Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the 

wireless LAN. 
If you change this field on the G-1000 v2, make sure all wireless stations use 

the same SSID in order to access the network. 

Choose Channel ID

To manually set the G-1000 v2 to use a specific channel, select a channel from 

the drop-down list box. 

Security

The level of Security can be selected as none, basic or extended. Choose 

None security to have no wireless LAN security configured and proceed to the 

 

section. 

Choose Basic (WEP) security if you want to configure WEP Encryption 

parameters. 
Choose Extend (WPA-PSK with customized key) or Extend (WPA2-PSK 

with customized key) security to configure a Pre-Shared Key. 
The next screen varies depending on which security level you select.

Back

Click Back to return to the previous screen.

Next

Click Next to continue.

Exit

Click Exit to quit the wizard without saving the changes.